Line Pressure Control
WARNING: This page is about a different variant/trim than selected.
When torque signal equivalent to engine driving force is sent from ECM to TCM, TCM controls the line pressure solenoid. By using the line pressure solenoid pressure as the signal pressure, controls the primary regulator valve and adjusts the pressure of ATF discharged from oil pump to the optimum level depending on the driving condition.
Maximum value of the calculated four values of required line pressure is set as the line pressure.
| No. | Control details |
|---|---|
| 1. Required line pressure for lubrication | The line pressure is calculated based on the input torque and gear range. |
| 2. Required line pressure for shift clutch | The line pressure is calculated based on the input torque, front vehicle speed signal, rear vehicle speed signal and gear range. |
| 3. Required line pressure for multi-plate clutch controlled by AWD | The line pressure required for the multi-plate clutch (LSD) is calculated. |
| 4. Required line pressure for lock-up clutch | The line pressure required for the lock-up clutch is calculated. |