Rear Lateral Link: Installation
CAUTION:
- Be sure to use a new self-locking nut.
- Always tighten the bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
- Before installation, inspect the following items and replace any faulty part with a new one.
- Visually check the rear lateral link for damage and deformation.
- Visually check the bushing for abnormal cracks, fatigue or damage.
- Install each part in the reverse order of removal.
Tightening torque:
Rear lateral link: 80 N.m (8.16 kgf-m, 59.0 ft-lb)
Shock absorber: 80 N.m (8.16 kgf-m, 59.0 ft-lb)
Stabilizer link: 33 N.m (3.36 kgf-m, 24.3 ft-lb)
- Inspect the wheel alignment and adjust if necessary.