Installation

Front Vehicle Speed Sensor

INSTALLATION

1) Install the front vehicle speed sensor.

Tightening torque:
7 Nm (0.7 kgf-m, 5.2 ft-lb)





2) Connect the front vehicle speed sensor connector.





3) Apply proper amount of liquid gasket to the entire oil pan mating surface.

Liquid gasket:
THREE BOND 1217B (Part No. K0877YA020) or equivalent





4) Install the oil pan by equally tightening the bolts.

Tightening torque:
5 Nm (0.5 kgf-m, 3.7 ft-lb)

5) Install the center differential carrier.
6) Install the extension case.

NOTE:
Use a new gasket.

Tightening torque:
25 Nm (2.5 kgf-m, 18.4 ft-lb)





7) Connect the rear vehicle speed sensor connector.





8) Install the transmission assembly to the vehicle.
9) Pour ATF from the oil charge pipe.
10) Check the level and leaks of ATF. A/T Fluid Inspection