Hydraulic Functional Failure
When a hydraulic functional failure is detected, the gear is shifted depending on the relation of faulty part and gear position at failure detection in order to ensure minimum drivability. The table below shows the relation of faulty parts and fixed gear range.
| Gear position at failure detection | ||||||
|---|---|---|---|---|---|---|
| 1st | 2nd | 3rd | 4th | 5th | ||
| Faulty part | Front brake | 1 | N → 1 | N→ 1 | N→ 1 | N→ 1 |
| Input clutch | 4 | 4 | 4 | N → 1 | N→ 1 | |
| High&low reverse clutch | 1 | N → 1 | N→ 1 | N→ 1 | N→ 1 | |
| Direct clutch | 2 | N → 1 | N→ 1 | N→ 1 | N→ 4 | |
| Forward brake | 4 | 3 | N → 2 | N→ 2 | N→ 2 | |
NOTE:
"→" indicates the gear range after vehicle stop.