LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System >> Cancel Code 14 >> Inspection steps
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection steps

  1. Check neutral start switch circuit.
    1. Disconnect the connector for neutral start switch ASSY.
    2. Turn the ignition switch to ON.
    3. Measure the voltage between the terminals.
      VOLTAGE

      Inspection terminals Inspection conditions Standard value
      L2-5 - chassis ground Always 10V or more

      NG: Repair or replace the harness.

      OK: Go to Next Step

  2. Check neutral start switch circuit.
    1. Turn the ignition switch to OFF.
    2. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      L2-5 - chassis ground Always Less than 10 Ω

      NG: Repair or replace the harness.

      OK: Go to Next Step

  3. Check neutral start switch.
    1. Perform a unit inspection of neutral start switch.

      Criteria: No fault is found.

      NO: Replace neutral start switch.

      YES: Replace the ECM.

scientia non olet · About LEMON Manuals