Data list diagnostics

OPERATION
1. Connect the SSM3 to the DLC3.
2. Start the engine.
3. Turn on the SSM3.
4. Select from the following menu items: [Each System Check]/[Engine System Control]/[Current Data Display & Save]
5. Make sure that normal display is shown when operated as follows:
  - Depress and release the brake pedal. (Stop light switch and brake switch turn ON).
  - Turn the "ON-OFF" switch to ON.
  - Turn the "-SET" switch to ON.
  - Turn the "+RES" switch to ON.
  - Turn the "CANCEL" switch to ON.
  - Depress or release the clutch switch.
  - Place the shift lever in any position other than neutral.
  NOTE: For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".