Navigation Receiver Assy: Installation
WARNING: This page is about a different car, the 2019 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Installation of navigation receiver bracket NO. 1
- Using the 4 screws, install the navigation receiver bracket NO. 1 onto the navigation receiver ASSY.
- Installation of navigation receiver bracket NO. 2NOTE: Perform the same procedure as with navigation receiver bracket NO. 1.
- Installation of AUX unit ASSY (Refer to INSTALLATION )
- Installation of navigation receiver ASSY
- Connect each connector.
- Using the 4 bolts, install the navigation receiver ASSY.
- Installation of the instrument cluster finish panel SUB-ASSY CTR (Refer to INSTALLATION , Step 16)
- Installation of the instrument panel ornament (Refer to INSTALLATION , Step 17)
- Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4 ft.lbf}
- Settings when removing/installing battery terminals (Refer to SETTING PROCEDURES AT PARTS REPLACEMENT AND REMOVAL/INSTALLATION )