Data Monitor/Active Test
WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Data monitor list
- Turn the ignition switch to OFF.
- Connect the SSM4 to the DLC3.
- Turn the ignition switch to ON.
- Follow the SSM4 display and select [Each System] →[Body Control] →[Data monitor] to bring up the data monitor item list.
- Use the data monitor to judge whether a component is working or not, and to narrow down the location of trouble.
SSM4 screen: [Each System] →[Body Control] →[Data monitor]
Item name Description/display range Normal value Remarks (Main inspection items during a malfunction) [BATT voltage (control)] - Shows the BATT (control) voltage.
- Display range: 0 to 21.4 V
11 to 14 V When a malfunction occurs, it may be due to a problem with battery voltage. [BATT voltage (BACKUP)] - Shows the BATT voltage backup.
- Display range: 0 to 21.4 V
11 to 14 V When a malfunction occurs, it may be due to a problem with battery voltage. [Ignition Power Supply Voltage] - Shows the IG power supply voltage.
- Display range: 0 to 21.4 V
11 to 14 V When a malfunction occurs, it may be due to a problem with the IG circuit. [ACC voltage] - Shows the ACC voltage.
- Display range: 0 to 21.4 V
11 to 14 V When a malfunction occurs, it may be due to a problem with the ACC circuit.