1. Data List
NOTE:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
CAUTION:
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Combination Meter, Occupant Detection or SRS Airbag / Data List.
- Read the Data List according to the display on the Techstream.
COMBINATION METER (COMBINATION METER ASSEMBLY)
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| [Driver Side Seatbelt Warning Buzzer] | Driver seat belt warning buzzer/ON or OFF | Customized value displayed | - |
| [P-Seatbelt Warning Buzzer] | Front passenger seat belt warning buzzer/ON or OFF | Customized value displayed | - |
OCCUPANT DETECTION (OCCUPANT DETECTION ECU)
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| [Status of Passenger Side Buckle SW] | Front passenger buckle switch/ON or OFF | Unset: Seat belt not fastened Set: Seat belt fastened NG: Data is not determined |
- |
AIRBAG CONTROL MODULE
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| [Status of Passenger Side Buckle SW] | Front passenger buckle switch/ON or OFF | Unset: Seat belt not fastened Set: Seat belt fastened NG: Data is not determined |
- |