Unit Inspection
WARNING: This page is about a different car, the 2019 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- ST relay check
- Check the resistance between relay connector terminals.
STANDARD VALUE RESISTANCE SPECIFICATIONInspection terminals Inspection conditions Standard value 1 - 2 20°C 93.8 to 136.4Ω 3 - 5 When the battery voltage is not applied to the terminal 1 and terminal 2: 10 k Ω or more When the battery voltage is applied to the terminal 1 and terminal 2: Less than 1 Ω - INHIBITOR relay check
- Check the resistance between relay connector terminals.
STANDARD VALUE RESISTANCE SPECIFICATIONInspection terminals Inspection conditions Standard value 1 - 2 20°C 93.8 to 136.4Ω 3 - 5 When the battery voltage is not applied to the terminal 1 and terminal 2: 10 k Ω or more When the battery voltage is applied to the terminal 1 and terminal 2: Less than 1 Ω - ST CUT relay check (with smart key system)
- Check the resistance between relay connector terminals.
STANDARD VALUE RESISTANCE SPECIFICATIONInspection terminals Inspection conditions Standard value 1 - 2 20°C 93.8 to 136.4Ω 3 - 4 When the battery voltage is not applied to the terminal 1 and terminal 2: Less than 1 Ω When the battery voltage is applied to the terminal 1 and terminal 2: 10 k Ω or more 3 - 5 When the battery voltage is not applied to the terminal 1 and terminal 2: 10 k Ω or more When the battery voltage is applied to the terminal 1 and terminal 2: Less than 1 Ω - IGS relay check (with smart key system)
- Check the resistance between relay connector terminals.
STANDARD VALUE RESISTANCE SPECIFICATIONInspection terminals Inspection conditions Standard value 1 - 2 20°C 93.8 to 136.4Ω 3 - 5 When the battery voltage is not applied to the terminal 1 and terminal 2: 10 k Ω or more When the battery voltage is applied to the terminal 1 and terminal 2: Less than 1 Ω