SUBARU Select Monitor (OBD Mode)

On «Main Menu» display, select {Each System Check}.
On «System Selection Menu» display, select {Engine Control System}.
Click the [OK] button after the information of engine type has been displayed.
On «Engine Diagnosis» display, select {OBD System}.
On «OBD Menu» display, select {Clear Diagnostic Code(s)}.
When the "Clear Diagnostic Code?" is shown on the screen, click the [Yes] button.
When "Done" and "Turn off the ignition switch." are shown on the display screen, turn the ignition switch to OFF.
NOTE:
- Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.
- For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".