Fuel Pump Control (On/Off Drive)
CAUTION:
After executing the system operation check mode, execute the Clear Memory Mode. < Refer to
OPERATION , Clear Memory Mode. >
- On «System Operation Check Mode» display, select {Fuel Pump Control}.
- On «Fuel Pump Control» display, select {ON/OFF Dr.}.
- On «Turn Ignition Switch ON with Engine OFF» display, turn the ignition switch to ON and click the [OK] button.
- On «ON/OFF Dr.» display, click the [Execution] button and execute the ON/OFF drive.
- Click the [Cancel] button to stop the ON/OFF drive.
- Click the [[f12]Exit] button to end the ON/OFF drive. The screen will return to the «Fuel Pump Control» screen.NOTE: For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".