Remote Control Mirror Switch: Inspection
- Disconnect the remote control mirror switch connector.
- Check the resistance between remote control mirror switch terminals.
Courtesy of SUBARU OF AMERICA, INC.
- Switch the change over switch to the right side.
| Switch position |
Terminal No. |
Standard |
| OFF |
- |
1 MΩ or more |
| UP |
8 and 3, 6 and 7 |
Less than 1 Ω |
| DOWN |
8 and 6, 3 and 7 |
Less than 1 Ω |
| LEFT |
8 and 2, 6 and 7 |
Less than 1 Ω |
| RIGHT |
8 and 6, 2 and 7 |
Less than 1 Ω |
- Switch the change over switch to the left side.
| Switch position |
Terminal No. |
Standard |
| OFF |
- |
1 MΩ or more |
| UP |
8 and 4, 6 and 7 |
Less than 1 Ω |
| DOWN |
8 and 6, 4 and 7 |
Less than 1 Ω |
| LEFT |
8 and 5, 6 and 7 |
Less than 1 Ω |
| RIGHT |
8 and 6, 5 and 7 |
Less than 1 Ω |
- Folding switch
| Switch position |
Terminal No. |
Standard |
| Folding |
8 and 9, 7 and 10 |
Less than 1 Ω |
| Unfolding |
8 and 10, 7 and 9 |
Less than 1 Ω |
- Replace the remote control mirror switch if the inspection result is not within the standard value.