LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Impreza Base, 4D Sedan, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (Except WRX) >> Electronic Throttle Control Relay >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electronic Throttle Control Relay: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G08317298Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the knee airbag module. < Refer to REMOVAL , Knee Airbag Module. >
  3. Release the lock and remove the fuse holder from the relay & fuse box.
    Fig 2: Locating Relay & Fuse Box Fuse Holder
    G08315475Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the connectors from the relay & fuse box.
  5. Remove the bolts (A) and nuts (B), and remove the relay & fuse box.
    Fig 3: Identifying Relay & Fuse Box Bolts And Nuts
    G08315476Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the electronic throttle control relay from the relay block on the back side of the fuse block.
    Fig 4: Locating Electronic Throttle Control Relay
    G08315477Courtesy of SUBARU OF AMERICA, INC.