Electrical Specification

For I/O signals of the body integrated unit, refer to CONTROL MODULE I/O SIGNAL .

For I/O signals of ECM, refer to ENGINE CONTROL MODULE (ECM) I/O SIGNAL (H4DO) or ENGINE CONTROL MODULE (ECM) I/O SIGNAL (H6DO).

For I/O signals of TCM, refer to TRANSMISSION CONTROL MODULE (TCM) I/O SIGNAL (5AT).

For I/O signals of VDC CM, refer to CONTROL MODULE I/O SIGNAL .

For I/O signals of electronic CM, refer to CONTROL MODULE I/O SIGNAL .

For unit I/O signals of A/C CM, refer to CONTROL MODULE I/O SIGNAL .

For I/O signals of combination meter, refer to Combination Meter System. See appropriate SYSTEM WIRING DIAGRAM article.

For I/O signals of stereo camera, refer to STEREO CAMERA .

For I/O signals of data link connector, refer to DATA LINK CONNECTOR (H4DO) or DATA LINK CONNECTOR (H6DO).

For I/O signals of the airbag CM, refer to AIRBAG CONTROL MODULE I/O SIGNAL .

For I/O signals of keyless access CM, refer to CONTROL MODULE I/O SIGNAL .

* CAN sleep state:

Hold on for approx. one minute with ignition OFF and the doors, trunk, rear gate all closed.