Combination Meter: Speedometer: General
- The speedometer system is an electrical type that uses electric signals from the ABS or vehicle dynamics control (VDC) control module.
- Since the system does not use mechanical components such as rotating cable, there are no opportunities of occurring such problems as meter needle vibration and cable disconnection. Also, it does not constitute any means of mechanical noise transmission.
- The odometer and trip meter readings appear on a liquid crystal display (LCD).
- At the trip meter display, the illumination level and the following trouble information (abnormality of various control modules, communication system, vehicle speed signals, etc.) are shown in addition to the trip meter reading.
| Indication | Indicated fault |
|---|---|
| "Er --" | High speed and low speed CAN communication failed simultaneously |
| "Er HC" | High speed CAN communication failure |
| "Er LC" | Low speed CAN communication failure |
| "Er IU" | Body integrated unit failure inside |
| "Er EG" | Engine control module communication counter failure |
| "Er tC" | Transmission control module communication counter failure |
| "Er Ab" | ABS/VDC control module communication counter failure |
| "Er SP" | Vehicle speed signal abnormal (ABS/VDC diagnostic trouble code information) |
| "Er SS" | Vehicle speed signal abnormal (wheel speed signal abnormal) |