LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment System >> Power Amplifier >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Amplifier: Removal

NOTE: harman/kardon® audio system only.
  1. Disconnect the ground cable from battery.
    NOTE: For the power seat, move the seat before removing the battery ground terminal.
  2. Move the passenger's seat to the front-most position.
  3. Remove the power amplifier.
    1. Disconnect the harness connector.
    2. Remove the nut and remove the power amplifier.
      Fig 1: Locating Power Amplifier Mounting Nuts
      G06653589Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals