Condition Check
WARNING: This page is about a different variant/trim than selected.
NOTE:
When replacing ATF, check the inside condition of transmission body by inspecting the drained ATF.
| Fluid condition | Trouble and possible cause | Corrective action |
|---|---|---|
| Large amount of metallic pieces are found. | Internal metal parts of transmission body are excessively worn. | Replace ATF and check if AT operates correctly. |
| Is thick and is a varnish-form fluid. | Clutch etc. is burned. | Replace ATF and check the AT body or vehicle for faulty. |
| Clouded fluid or bubbles are found in fluid. | Water is mixed. | Replace ATF and check the water entering point. |