Reduction Driven Gear: Assembly

WARNING: This page is about a different variant/trim than selected.

Using the ST, install the parking gear.
ST 499755602 PRESS

Fig 1: Installing Parking Gear Using ST
Courtesy of SUBARU OF AMERICA, INC.
Install the snap ring.

Fig 2: Identifying Snap Ring
Courtesy of SUBARU OF AMERICA, INC.
Install the ball bearing to the reduction driven gear using a press.
NOTE: Use a new ball bearing.

ST 18654AA000 INSTALLER

Fig 3: Installing Ball Bearing To Reduction Driven Gear Using Press
Courtesy of SUBARU OF AMERICA, INC.
Install the ball bearing on the reverse side with the same procedure as step 3).
ST 18654AA000 INSTALLER

Fig 4: Installing Ball Bearing On Reverse Side
Courtesy of SUBARU OF AMERICA, INC.