LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control System (Diagnostics) >> Registration Body Integrated Unit >> Operation >> Destination Setting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Destination Setting

NOTE: For the vehicle requiring the destination setting, if the destination setting is not finished, display can not be shifted into customizing screen.
Step Check Yes No
1 CONFIRM CURRENT SETTING. 
Always perform confirmation of current setting before replacing the module.
Record the contents of the "Destination Setting".
NOTE: Refer to the CONFIRM CURRENT SETTING  to confirm the current setting, and OPERATION  to read current data.
 Is the current setting recorded? Go to step 2  . Confirm the current setting. Go to step 1  .
2 CONFIRM DESTINATION SETTING. 
  1. Connect the Subaru Select Monitor, and run the application.
  2. On «Main Menu» display, select {Each System Check}.
  3. On the «System Selection Menu» display, select {Integ. unit mode}.
  4. Select {Unit Customizing} from «Integ. unit mode».
  5. The vehicle destination screen is displayed.
 Is the vehicle destination setting screen displayed? Go to step 3  . Go to step 4  .
3 CONFIRM DESTINATION SETTING. 
Confirm the screen displayed on Subaru Select Monitor and the actual vehicle destination.		 Do the screen and vehicle destination setting match? Select [OK]. Go to step 8  . Select [Cancel]. Go to step 4  .
4 CONFIRM SCREEN. 
"Select Parameter" is displayed on Subaru Select Monitor screen.		 Is "Select Parameter" displayed on Subaru Select Monitor screen? Go to step 5  . Go to step 8  .
5 ENTER DESTINATION CODE. 
Enter the appropriate code in the screen. U4, U5, U6, C4, C6: U400 C0, C5: C000 Is the appropriate code entered?		 Select [OK]. Go to step 6  . Enter the destination code. Go to step 5  .
6 CONFIRM SCREEN. 
Check the screen displayed.		 Is error screen displayed? Enter the suitable code. Go to step 4  . Go to step 7  .
7 CONFIRM SCREEN. 
Check the screen displayed.		 Is there the entered destination among the destinations displayed in the screen? Select [OK]. Go to step 8  . Select [Cancel]. Error screen is displayed, select [OK]. Go to step 4  .
8 REGISTER VEHICLE EQUIPMENTS. 
Customizing screen is displayed.
NOTE: Match the each item setting of body integrated unit registration item list with the vehicle equipments.
 Do all setting contents match with the vehicle equipment specification? Go to step 9  . Change the items until each content setting match with the vehicle equipments specification. Go to step 8  .
9 CONFIRM MARKET MODE. 
  1. Customizing screen, select the {Factory initial setting} to change the setting from "Factory" mode to "Market" mode.
  2. Turn the ignition switch to OFF.
    NOTE: When the setting is changed from "Factory" mode to "Market" mode, turning the ignition switch from ON → OFF confirms the setting.
  3. Turn the ignition switch to ON, and check the contents of settings.
 Is the mode changed to "Market" mode? Go to step 10  . Perform the destination setting from the first step. Go to step 1  .
10 CONFIRM MARKET MODE. 
Check that the engine starts.		 Does the engine start? Registration of body integrated unit is finished. It is possible that harness malfunction may occur. Perform the diagnosis.
scientia non olet · About LEMON Manuals