Power Seat System: Installation
Install each part in the reverse order of removal.
Tightening torque:
Power seat control module: 5.9 N.m (0.60 kgf-m, 4.4 ft-lb)
NOTE:
- The seat with memory function must be initialized after installed. < Ref. to ADJUSTMENT , Power Seat System. >
- After replacing a seat with memory function and the power seat control module, check the following items.
- Memory is reloaded when the ignition is ON and the select lever is shifted to "P" range.
- Memory is not reloaded even if the seat memory switch is pressed, when the ignition is ON and the select lever is set to other than "P" range.
- Memory is reloaded when the ignition is OFF and the driver's door inner switch is pressed within 45 seconds after the door is opened.
- Memory is reloaded automatically when the ignition is OFF and the driver's door is opened after unlocked by access key. (model with smart key interlock function)