LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Electrical >> Gauges >> Instrumentation System & Driver Information Center >> Multi Display >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Multi Display: Removal

  1. Remove the center speaker cover.
    NOTE: If the cover is hard to remove, first remove the audio assembly or navigation assembly, and then push up the cover from the backside.
    1. Push up the center speaker cover from the audio space.
    2. Disconnect the claws and hooks and remove the center speaker cover.
      Fig 1: Identifying Center Speaker Cover Claws And Hooks
      G06653118Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the multi display.
    CAUTION: Be careful not to damage the multi display or instrument panel.
    1. Release the clips and claws, detach the multi display panel LWR.
    2. Remove the screws and pull out the multi display toward you to disconnect the connectors.
      Fig 2: Locating Multi Display Screws
      G06653119Courtesy of SUBARU OF AMERICA, INC.