Ignition Timing: Inspection
CAUTION:
After warming-up, engine becomes very hot. Be careful not to burn yourself at measurement.
- Before checking the ignition timing, check the following item:
- Check the air cleaner element is free from clogging, spark plugs are in good condition, and hoses are connected properly.
- Check the malfunction indicator light does not illuminate.
- Warm up the engine.
- Read the ignition timing using Subaru Select Monitor. Refer to
DISPLAY OF ENGINE FREEZE FRAME DATA
.NOTE: If ignition timing is out of standard, check the ignition control system. Refer to BASIC DIAGNOSTIC PROCEDURE .
Ignition timing [BTDC/rpm]:
Standard
16°±10°/675 (CVT model)
16°±10°/650 (MT model)