Operating Cylinder: Assembly

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: During assembly, apply hydraulic oil to all parts.

Recommended clutch fluid:

New FMVSS No. 116 DOT3 or DOT4

Install the piston spring onto the piston.

Fig 1: Identifying Piston And Piston Spring
Courtesy of SUBARU OF AMERICA, INC.
Insert piston into the operating cylinder.
Install push rod to the boot.
Install boot and push rod to the operating cylinder.

Fig 2: Identifying Boot And Push Rod
Courtesy of SUBARU OF AMERICA, INC.