Clear Memory Mode: Operation

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Shift the select lever to "P" range.
Using the Subaru Select Monitor, on the «Main Menu» display, select {Each System Check}.
On «Each System Check Menu» display, select {Transmission Control System}.
After transmission type information is displayed, select [OK].
On «Transmission Diagnosis» display, select {Clear Memory}.
When «Done Turn Ignition Switch OFF» is displayed, select [OK].
Turn the ignition switch to OFF. To turn the ignition switch to ON again, wait for 10 seconds or more.
Turn the Subaru Select Monitor to OFF.

NOTE:

If {Clear Memories 2} is executed, DTCs and learned control memory are cleared.
If {Clear Memories 2} is executed, perform learning. < Refer to LEARNING CONTROL . >