Combination Switch (Light): Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Remove the screws and remove the steering column cover lower.

Fig 1: Locating Steering Column Cover Lower Screw
Courtesy of SUBARU OF AMERICA, INC.
Remove the harness cover lock.
Remove the screws and detach the knee protector.

Fig 2: Locating Knee Protector Screws
Courtesy of SUBARU OF AMERICA, INC.
Remove the mounting screws of steering column cover upper.

Fig 3: Removing Steering Column Cover Upper Screws
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from combination switch.
Remove the screws which secure the switch, then remove the combination switch.

Fig 4: Locating Combination Switch Screws
Courtesy of SUBARU OF AMERICA, INC.