LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Lighting System) >> Side Turn Signal Light Assembly >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Side Turn Signal Light Assembly: Inspection

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the side turn signal light assembly and check that it blinks normally.
  2. If it fails to blink normally, replace the side turn signal light assembly with a new part.
    NOTE: Since LED (Light Emitting Diode) is used for the side turn signal light, replace the side turn signal light assembly if the LED burns out.
scientia non olet · About LEMON Manuals