LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Lighting System) >> Side Turn Signal Light Assembly >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Side Turn Signal Light Assembly: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the mirror. < Refer to REPLACEMENT , Outer Mirror. >
  3. Remove the scalp cap. < Refer to REPLACEMENT , Scalp Cap. >
  4. Remove the outer mirror lower cover.
    Fig 1: Removing Outer Mirror Lower Cover
    G08566260Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the side turn signal light assembly.
    Fig 2: Locating Side Turn Signal Light Assembly Screws
    G08566261Courtesy of SUBARU OF AMERICA, INC.
  1. Remove the screws.
  2. Disconnect the harness connector.
scientia non olet · About LEMON Manuals