LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Vehicle Dynamics Control (VDC) System (Diagnostics)) >> Subaru Select Monitor >> Operation >> Parameter Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Parameter Check

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The parameter data registered in the VDCCM is shown on the display.
  1. Connect the Subaru Select Monitor.
  2. On the «Main Menu» display, select {Each System Check}.
  3. On the «System Selection Menu», select {Brake Control System}.
  4. Click the [OK] button after the {VDC} is displayed.
  5. On the «Brake Control Diagnosis», select {Confirm on parameter}.
  6. On the {Confirm on parameter} display screen, check that the applied model and grade of the target vehicle are included, and click the [OK] button.
  7. If the applied model and grade of the target vehicle are not included on the {Confirm on parameter} display screen, perform parameter selection and registration. < Refer to PARAMETER SELECTION , OPERATION, Subaru Select Monitor. >
scientia non olet · About LEMON Manuals