Function Check: Operation

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: In order to check the body integrated unit function, inspect the body integrated unit and actuator using Subaru Select Monitor without operating switches.

On «Main Menu» display, select {Each System Check}.
On «System Selection Menu» display, select {Integ. unit mode}.
On «Integ. unit mode failure diag.» display, select {Function check}.
Select the item to be operated on the «Function check» display screen with "UP/Down key" and press the [Next] button.
Pressing [Next] starts, [End] cancels the operation and [OK] returns to the System Operation Check Mode display screen.

NOTE:

If not equipped (based on area or condition), process will not go on.
For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".