Front Sub Sensor

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

How to disconnect:
CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
1. Push the lock arm.
2. Holding outer part, pull it for one level in the direction of arrow.
  
  Fig 1: Pushing Lock Arm
  Courtesy of SUBARU OF AMERICA, INC.
3. Push the lock arm again.
4. Holding outer part, pull it in the direction of arrow to separate the connector.
  
  Fig 2: Disconnecting Front Sub Sensor Connector
  Courtesy of SUBARU OF AMERICA, INC.
How to connect:
CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.

Holding the connector, push it in securely until a clicking sound is heard.

Fig 3: Inserting Front Sub Sensor Connector
Courtesy of SUBARU OF AMERICA, INC.