Curtain Airbag Module: Inspection
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Refer to "CAUTION" of "General Description" before handling the airbag module. < Refer to
CAUTION , General Description. >
Check for the following, and replace the damaged parts with new parts. < Refer to CURTAIN AIRBAG MODULE , INSPECTION, Inspection Locations after a Collision. >
- With side collision (when curtain airbag is activated)
- Curtain airbag module assembly
- Satellite safing sensor
- Curtain airbag sensor
- Roof trim
- Front pillar upper trim
- Center pillar upper trim
- Rear quarter pillar trim
- Airbag guide
- When damage is found by visual check
- Assist grip
- Assist grip bracket
- Curtain airbag harness and connector on body side.
- Satellite safing sensor cover (model without rear seat center table)
- With side collision (when curtain airbag is not activated)
Check the roof trim, pillar trim, airbag module and sensor visually, and then replace them with new parts if damaged or cracked.
Specially inspect the damage of airbag module body, mounting bracket and harness connector.
- Without side collision (dirt and damage of cover) Replace the corresponding part with a new part.