LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Air Bag System) >> Front Sub Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Sub Sensor: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work.
  3. Remove the front bumper face. < Refer to REMOVAL , Front Bumper. >
  4. Remove the headlight assembly. < Refer to REMOVAL , Headlight Assembly. >
  5. Remove the bolt, and then detach the front sub sensor.
    Fig 1: Identifying Front Sub Sensor Bolt
    G05957539Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect the connector from front sub sensor.
scientia non olet · About LEMON Manuals