Basic Diagnostic Procedure: Procedure
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK MALFUNCTION INDICATOR LIGHT. Make sure the malfunction indicator light illuminates. |
Does the malfunction indicator light illuminate? | Go to step 5 . | Go to step 2 . |
| 2 CHECK CRUISE INDICATOR LIGHT. Make sure the cruise indicator light blinks. |
Does the cruise indicator light blink? | Go to step 7 . | Go to step 3 . |
| 3 CHECK CRUISE CONTROL MAIN SWITCH OPERATION. Check cruise control main switch operation. (Ensure the cruise indicator light illuminates.) |
Is the cruise control main switch turned on? (Does the cruise indicator light illuminate?) | Go to step 4 . | Go to phenomenon 1.< Refer to DIAGNOSTIC PROCEDURE WITH PHENOMENON , Diagnostics with Phenomenon. > |
| 4 CHECK CRUISE CONTROL SET OPERATION. Check the cruise control setting operation. |
Can the cruise control be set while driving at 40 km/h (25 MPH) or more? | Go to step 8 . | Go to step 7 . |
| 5 CHECK DTC. Read all DTCs using the Subaru Select Monitor. |
Is an engine or ABS/VDC related DTC displayed? | Record the DTC. Go to step 6 . | Go to phenomenon 2.< Refer to DIAGNOSTIC PROCEDURE WITH PHENOMENON , Diagnostics with Phenomenon. > |
| 6 CHECK FREEZE FRAME DATA. Using the Subaru Select Monitor, check the Freeze Frame Data or Information in Trouble State. |
Was the Freeze Frame Data or Information in Trouble State recorded? | Record the data. Perform the diagnosis according to DTC related to engine or ABS/VDC. | Perform the diagnosis according to DTC related to engine or ABS/VDC. |
| 7 CHECK CANCEL CODE. Using the Subaru Select Monitor, read the cancel codes.
NOTE:
|
Is it possible to read the cancel codes? | Perform the diagnosis according to the cancel code.< Refer to LIST , List of Cancel Code. > | Go to step 8 . |
| 8 CHECK CRUISE SET INDICATOR LIGHT. Make sure the cruise set indicator light illuminates. |
Does the cruise set indicator light illuminate? | Go to step 9 . | Go to phenomenon 3.< Refer to DIAGNOSTIC PROCEDURE WITH PHENOMENON , Diagnostics with Phenomenon. > |
| 9 CHECK VEHICLE SPEED IS HELD WITHIN SET SPEED. Make sure the vehicle speed is held within set speed. |
Is the vehicle speed kept within setting speed ±3 km/h (±2 MPH)? (Make sure that on a level road.) | Go to step 10 . | Go to phenomenon 4.< Refer to DIAGNOSTIC PROCEDURE WITH PHENOMENON , Diagnostics with Phenomenon. > |
| 10 CHECK RESUME/ACCEL OPERATION. Check the RESUME/ACCEL switch operation. |
Does the vehicle speed increase or return to set speed after RESUME/ACCEL switch has been pressed? | Go to step 11 . | Go to phenomenon 5.< Refer to DIAGNOSTIC PROCEDURE WITH PHENOMENON , Diagnostics with Phenomenon. > |
| 11 CHECK SET/COAST OPERATION. Check the SET/COAST switch operation. |
Does the vehicle speed decrease after SET/COAST switch has been pressed? | Go to step 12 . | Go to phenomenon 6.< Refer to DIAGNOSTIC PROCEDURE WITH PHENOMENON , Diagnostics with Phenomenon. > |
| 12 CANCEL OPERATION CHECK. Check the CANCEL switch operation. |
Is the cruise control released after CANCEL switch has been pressed? | Go to step 13 . | Go to phenomenon 7.< Refer to DIAGNOSTIC PROCEDURE WITH PHENOMENON , Diagnostics with Phenomenon. > |
| 13 CHECK CRUISE CONTROL RELEASE OPERATION. Check the cruise control release operation. |
Is the cruise control released after brake pedal has been depressed? | Go to step 14 . | Go to phenomenon 8.< Refer to DIAGNOSTIC PROCEDURE WITH PHENOMENON , Diagnostics with Phenomenon. > |
| 14 CHECK CRUISE CONTROL RELEASE OPERATION. Check the cruise control release operation. |
Is the cruise control released after shifting to the neutral position? | Go to step 15 . | Go to phenomenon 9.< Refer to DIAGNOSTIC PROCEDURE WITH PHENOMENON , Diagnostics with Phenomenon. > |
| 15 CHECK CRUISE CONTROL RELEASE OPERATION. Check the cruise control release operation. |
Is the cruise control released after depressing the clutch pedal? | Finish the diagnosis. | Go to phenomenon 10.< Refer to DIAGNOSTIC PROCEDURE WITH PHENOMENON , Diagnostics with Phenomenon. > |