Real-Time Diagnosis

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Select {Current Data Display & Save} in «Engine Diagnosis» display screen.
Make sure that normal display is shown when operated as follows:
- Depress and release the brake pedal. (Stop light switch and brake switch are turned ON.)
- Turn the main switch to ON.
- Turn the "CANCEL" switch to ON.
- Turn the "SET/COAST" switch to ON.
- Turn the "RESUME/ACCEL" switch to ON.
- Depress or release the clutch pedal.
- Place the shift lever in any position other than neutral.
NOTE:
- For details concerning the operation procedure, refer to the "PC application help for Subaru Select Monitor".
- For detailed concerning cancel code, refer to the "List of Cancel Codes".< Refer to LIST OF CANCEL CODE . >