Cruise Control Command Switch: Inspection

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the cruise control command switch connector.

Check the resistance between cruise control command switch terminals.

Fig 1: Identifying Cruise Control Command Switch Terminals

Courtesy of SUBARU OF AMERICA, INC.

Switch	Position	Terminal No.	Standard
CANCEL SET/COAST RESUME/ACCEL	All OFF	7 and 6	Approx. 4 kΩ
CANCEL	ON	7 and 6	Less than 1 Ω
SET/COAST	ON	7 and 6	Approx. 250 Ω
RESUME/ACCEL	ON	7 and 6	Approx. 1500 Ω
MAIN (CRUISE)	OFF	8 and 6	1 MΩ or more
MAIN (CRUISE)	ON	8 and 6	Less than 1 Ω

Replace the cruise control command switch if the inspection result is not within the standard value.