LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Continuously Variable Transaxle (CVT)) >> Torque Converter Assembly >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Converter Assembly: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission assembly from the vehicle. Refer to REMOVAL .
  2. Pull out the torque converter assembly horizontally.
    CAUTION: Do not scratch the inside of engaging parts.
    Fig 1: Identifying Torque Converter Assembly
    G08578787Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the O-ring from the input shaft.
scientia non olet · About LEMON Manuals