Steering Switch: Inspection

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the airbag module from the steering wheel. < Refer to REMOVAL , Driver's Airbag Module. >

Connect the tester as shown in the figure, then check resistance between terminals when each switch is pressed.

Fig 1: Checking Resistance Between Steering Switch Terminal 2 And 6

Courtesy of SUBARU OF AMERICA, INC.

Switch	Resistance
No switch pressed	1 MΩ or more
HOOK ON	Approx. 330 Ω
HOOK OFF	Approx. 1010 Ω
TALK	Approx. 3.21 kΩ

If internal resistance is out of specification shown in the above table, replace the steering switch.