LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback R >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Continuously Variable Transaxle (CVT)) >> Primary Speed Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Primary Speed Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: Be sure to prevent water or oil from contacting the connector terminal of primary speed sensor. If adhesion occurs, replace with a new part.
  1. Remove the transmission assembly. Refer to REMOVAL .
  2. Remove the primary speed sensor.
    Fig 1: Locating Primary Speed Sensor
    G08317803Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the harness connector from primary speed sensor.
    Fig 2: Identifying Primary Speed Sensor Harness Connector
    G08317804Courtesy of SUBARU OF AMERICA, INC.