LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Tribeca >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Pipe Assembly >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pipe Assembly: Installation

  1. Install in the reverse order of removal.

    Tightening torque: 

    < Ref. to  POWER ASSISTED SYSTEM  , COMPONENT, General Description. > 

  2. Fill with the specified fluid.
    CAUTION: Never start the engine before filling with fluid; otherwise the vane pump may become seized.
  3. Finally, check the clearance between pipes or hoses as shown in the figure indicated in "General Diagnostic Table". < Ref. to INSPECTION OF CLEARANCE , INSPECTION, General Diagnostic Table. >
scientia non olet · About LEMON Manuals