LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2014 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System >> Cruise Control Main Switch >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise Control Main Switch: Removal

  1. Disconnection of the battery ground terminal (Refer to WORKING PRECAUTIONS AND NOTES )
    WARNING: Airbag and pretensioner system are equipped with backup power supply. Therefore, if any operation is started within 60 seconds after disconnecting the battery ground terminal, the airbag can deploy.
  2. REMOVE STEERING WHEEL ASSEMBLY (Refer to REMOVAL )
  3. REMOVE CRUISE CONTROL MAIN SWITCH ASSEMBLY
    1. Remove the 4 screws.
    2. Engage the 2 claws and remove the lower steering wheel cover and cruise control main switch assembly.
    3. Disengage the clamp and disconnect the cruise control main switch wire connector.
      Fig 1: Locating Cruise Control Main Switch Wire Connector Screws
      G08556846Courtesy of SUBARU OF AMERICA, INC.