Display Of Current Data/System Operation Check Mode

Inspection with SSM3

Data monitor

Using SSM3, check [Current Data Display] to determine functionality and narrow down the defective part.

SSM3 SCREEN: [EACH SYSTEM CHECK]→ [INTEG. UNIT MODE]→ [CURRENT DATA DISPLAY & SAVE]

Item Name

Description/display range

Normal value

Remarks

[Rr Defogger op. mode]

Rear defogger operation status/Display range: Normal - Continuous⁽¹⁾

Normal: OFF after 15 minutes Continuous: 15-min. operation and 2-min. stop are repeated.

[Rear Defogger SW Input]

Rear defogger switch status/Display range: [ON] - [OFF]

[Rr Defogger output]

Rear defogger output status/Display range: [ON] - [OFF]

⁽¹⁾	For automatic air conditioning system

SSM3 DISPLAY: [EACH SYSTEM CHECK] →[AIR CONDITION SYSTEM] →[CURRENT DATA DISPLAY.SAVE]

Item Name	Description/display range	Normal value	Remarks
[Rear Defogger relay]	Rear defogger relay status/Display range: [ON] - [OFF]	-	-

[System Operation Check Mode]

Using SSM3, check [System Operation Check Mode] to determine functionality and narrow down the defective part.

SSM3 DISPLAY: [EACH SYSTEM CHECK] →[INTEG. UNIT MODE] →[SYSTEM OPERATION CHECK MODE]

Item Name	Drive
[Rear defogger]	Rear defogger output ON / OFF

SSM3 DISPLAY: [EACH SYSTEM CHECK] →[POWER WINDOW] →[SYSTEM OPERATION CHECK MODE]

Item Name	Drive
[P seat power window UP/DOWN]	UP / DOWN