LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2014 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Stability Control System >> VSC (VDC) OFF Switch >> Unit Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Unit Inspection

  1. Console switch assembly check
    1. Check that the VSC (VDC) OFF switch is not sticking.
      1. Check the resistance between the VSC (VDC) OFF switch terminals.
      CRITERIA

      Inspection terminals Inspection conditions Criteria
      5 - 8 When the switch is not being operated 10 k Ωor more
      When the switch is being operated. Less than 1 Ω
    2. Check that the VSC (VDC) SPORT switch is not sticking.
      1. Check the continuity between the VSC (VDC) SPORT switch terminals.
      CRITERIA

      Inspection terminals Inspection conditions Standard value
      1 - 8 When the switch is not being operated 10 k Ωor more
      When the switch is being operated. Less than 1 Ω
      Fig 1: Identifying Console Switch Assembly Connectors
      G08555380Courtesy of SUBARU OF AMERICA, INC.
    3. Check the illumination operation.
      1. Check the illumination operation when battery voltage is applied between connector terminals.
      CRITERIA

      Battery connection Standard value
      Battery positive →2
      Battery negative →3      		 Illumination comes ON.
scientia non olet · About LEMON Manuals