Typical Enabling Conditions

TYPICAL ENABLING CONDITIONS - ALL

Overlap prohibited DTC

P0068, P0107, P0108 (Vacuum (MAP) sensor)
P0102, P0103 (intake air flow (MAF) meter)
P0117, P0118, P0125 (engine coolant temperature (ECT) sensor)
P0122, P0123, P0222, P0223 (Throttle position sensor)
P0335, P0336 (crankshaft position sensor)
P0340, P0345 (camshaft position sensor - intake with variable valve timing (VVT))
P0506, P0507 (idle speed control (ISC))
P0604, P0605 (ECM ROM), P0606 P1160 (throttle return spring)
P2101, P2102 (Throttle actuator control motor)
P2109 (Throttle position sensor minimum stop)
P2119 (Throttle actuator control)
P2122, P2123, P2127, P2128 (Accelerator Pedal Position Sensor (APPS) circuit)
P2135 (Throttle position sensor (TPS) degree of correlation)
P2138 (Accelerator pedal position sensor (APPS) degree of correlation)

TYPICAL ENABLING CONDITIONS - LOW PRESSURE SIDE MONITOR

Engine Speed	1500 RPM or more
Throttle opening angle	8% or more
Engine coolant temperature	60°C {140°F} or more
Intake manifold pressure	53.32 kPa {400 mmHg} or more

TYPICAL ENABLING CONDITIONS - HIGH PRESSURE SIDE MONITOR

Engine Speed	550 to 880 r/min
Throttle opening angle	Less than 3.04%
Engine coolant temperature	60°C {140°F} or more
Intake manifold pressure	Less than 53.32 kPa {400 mmHg}