AT learning values initialization
CAUTION:
- Execute [Clear the AT learned information] when any of transmission ASSY, valve body ASSY, transmission wire, engine ASSY, transmission control computer is replaced.
- Wait for 1 minute or more after connecting the battery terminal when performing AT learning value initialization.
NOTE:
The learning value is not initialized (cleared) only by removing the ground terminal of the battery.
- Check that the shift is in P position and connect SSM3 to DLC3 to turn IG and the power of SSM3 ON.
CAUTION:
Do not start engine.
- Execute AT learning value initialization.
- Select [Transmission Control System/Work Support] →[Clear the AT learned information] from the main menu according to SSM3 screen display and execute them to initialize AT learning value.