LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2014 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle (Service Information) >> Select Lever >> Unit Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Unit Inspection

  1. Check of select lever ASSY
    1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions (shift position) Standard value
      1 - 3 Select lever in any other than P position Less than 1 Ω
      2 - 3 Select lever in P position
      8 - 9 When select lever is in M position and shifted to "+"
      10 - 11 Select lever in M position
      12 - 13 When select lever is in M position and shifted to "-"
      1 - 3 Select lever in P position 10 k Ωor more
      2 - 3 Select lever in any other than P position
      8 - 9 Except when select lever is in M position and shifted to "+"
      10 - 11 Select lever in any other than M position
      12 - 13 Except when select lever is in M position and shifted to "-"
      Fig 1: Select Lever Assy Terminals Layout
      G08554478Courtesy of SUBARU OF AMERICA, INC.
  2. Check of shift lock solenoid ASSY
    1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      4 - 5 20°C 27.6 to 30.5 Ω
      Fig 2: Shift Lock Solenoid Assy Terminals Layout
      G08554479Courtesy of SUBARU OF AMERICA, INC.