Camera System Connection
- Turn the ignition switch to ON with audio OFF, and while pressing the preset 1 key, press and hold the preset keys 4+5+6 for at least 1.5 seconds.NOTE: You can press the preset keys 4 through 6 in any order, but be sure to keep each key pressed.
- When «System Diagnostic Menu» is displayed, select {Confirmation/Adjustment} by SCROLL/TUNE dial, then press ENTER/SETTING key (SCROLL/TUNE dial).
- When «System.. > Confirmation/Adjustment» is displayed, select {Camera System} by SCROLL/TUNE dial, then press ENTER/SETTING key (SCROLL/TUNE dial).
- Check that the rear view camera image and marker are displayed.
- If they are not displayed, check the connection status of the connector. If there are no problems, the connection device or unit could be faulty.