Function Setting (Customize): Procedure

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Check that the vehicle status is as follows:
- Ignition switch OFF
- One window is completely open
- Keyless access system is activated (or disabled if re-activating)
Sit in the driver's seat with the door closed and press the door lock switch to UNLOCK once.
Open the driver's door within five seconds.
Within 5 seconds, with the driver's door opened, slowly press the door lock switch to UNLOCK twice.
Within 30 seconds, perform the closing → opening operation of the driver's door twice.
Within 30 seconds, with the driver's door opened, slowly press the door lock switch to UNLOCK twice.
Within 30 seconds, perform the closing → opening operation of the driver's door once.
Within five seconds, close the driver's door.
NOTE:
- Perform the same procedures to re-activate the keyless access system from the disabled condition.
- If the driver's door is opened or closed in step 4) and step 6), the cancel operation is disabled.