LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2014 >> Outback 2.5i, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Security And Locks) >> Impact Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Impact Sensor: Installation

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the key from ignition switch.
  2. Close all the doors and rear gate.
  3. Press the UNLOCK button of the keyless transmitter.
  4. Disconnect the ground cable from battery.
  5. Install the impact sensor.
  6. Change the impact sensor setting using the Subaru Select Monitor.
scientia non olet · About LEMON Manuals