Security System On/Off Setting
WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
It can be set by «Security Alarm Setup» in unit customizing using Subaru Select Monitor.
For detailed procedures, refer to "PC application help for Subaru Select Monitor".
For detailed procedures, refer to "PC application help for Subaru Select Monitor".
- Close all doors and rear gate, and sit in the driver's seat. Press the UNLOCK button of the keyless transmitter or access key.
- Turn the ignition to ON.
- Press the central door unlock switch and open the driver's door simultaneously. (Keep the central door unlock switch pressed down.)
- When the condition in step 3) continues for 10 seconds, the system switches to a mode reverse to the current mode.
Setting Horn activation Meter display ON → OFF Twice [AL_OF] OFF → ON Once [AL_ON]